โทร 02-194-8739
POWER FACTOR CONTROLLER
MULTICOMP F144-3PH - REACTIVE POWER CONTROLLER
The multicomp F144-3Ph-…-3 reactive power controller automatically works in 4-quadrant operation (generator operation), i.e. even with return feed into the energy supplier network, missing compensation power is detected and compensated without any problem. Through the integrated temperature measurement input, the ambient temperature in the reactive power compensation unit is also monitored, and if a predefined limiting temperature is exceeded, the ventilator is switched on. Through the three-phase recording of voltage and current, not only the usual three-phase compensation is possible, but also single-phase compensation or a combination of single-phase and three-phase compensation.
DOWNLOAD
MULTICOMP F144-...-3 - REACTIVE POWER CONTROLLER
The microcontroller-controlled multicomp F144-3 records all network data relevant to the control of small systems via A/D transformer inputs. After calculating the required compensation power to achieve the desired target cos φ, the available capacitor stages are automatically switched on or off with a few switching operations. Programming is menu-assisted and is performed with two buttons. System-specific values are stored in a non-volatile memory. Each stage can be switched individually via the built-in manual-0-automatic function.
DOWNLOAD
REACTIVE POWER CONTROLLER
The multicomp D6 reactive power controller works automatically in 4-quadrant operation (generator operation), i.e. even during energy recovery to the energy provider network, missing compensation power is easily detected and compensated.
Through the integrated temperature measurement input, the ambient temperature in the reactive power compensation system is also monitored and if a predefined limit temperature is exceeded, the fan is switched on. The multicomp D6 reactive power controller also has an interface for connection to the KBR eBus, whereby all settings can be conveniently carried out from the PC (without the display module). In addition, the bus communication can be switched from KBR eBus to Modbus RTU/ASCII.